ciao@dressource.com+880 1607 002449Rupyan Shopping Square, Dhaka 1229, BangladeshA DRESSOURCE® companydressource.com

Workwear Logo Placement Guide: Shirts, Polos, Vests and Jackets

By Dressource Workwear · Published · Updated · Written for 2027 sourcing plans

Workwear Logo Placement Guide: Shirts, Polos, Vests and Jackets
Key takeaway: Left chest is the standard logo position for shirts and polos, while vests and jackets often add a larger back print or embroidery. Keep logos clear of seams, pockets and, on safety garments, reflective tape, and follow the garment certifier’s instructions.

Common positions by garment

Shirts and polos: left chest, sometimes right sleeve. Vests: left chest plus a larger back area. Jackets: left chest, sleeve and back. Aprons: upper bib or pocket area.

Size and visibility

Keep left-chest logos compact and legible at conversation distance, and use a larger back logo for identification at a distance. Provide vector artwork and the physical size you want, not only the position.

Keep clear of seams, pockets and tape

Avoid placing logos across thick seams, zips or pockets, where stitching puffs or distorts. On hi-vis and other certified garments, do not apply logos over reflective tape or in areas that change the garment’s certified design unless the manufacturer or certifier permits it.

Choose the method for the position

Embroidery suits left chest on polos and shirts; transfers or prints may suit larger back areas. See embroidery vs screen printing vs DTF.

Summary table

GarmentPrimary positionOptional
Polo / shirtLeft chestSleeve, back neck
Work vestLeft chestLarge back panel
JacketLeft chestSleeve, back
CoverallLeft chestBack, sleeve
ApronBib upper areaPocket

Supply with your artwork

  • Vector logo file (AI, EPS, PDF or SVG)
  • Size in mm or inches for each position
  • Placement mock-up on the garment
  • Thread or ink colour references
  • Safety-garment placement approved by the manufacturer or certifier

Frequently asked questions

Where should a logo go on a polo shirt?

Left chest is standard; sleeve or back neck are common secondary positions.

Can I put a logo on a hi-vis vest?

Often yes, but placement must not compromise the certified design or cover reflective tape, so follow the manufacturer and certifier guidance for your market.

What file do I need for logo placement?

A vector file, ideally with a mock-up showing size and position.

Request a quote Browse the catalog

Related: Workwear Quote Checklist: What to Prepare Before Requesting a Quotation · High-Visibility Workwear Standards Explained: ANSI/ISEA 107, CSA Z96, EN ISO 20471 & AS/NZS 4602.1 · Workwear Manufacturer in Bangladesh: 2027 Buyer’s Guide for USA, UK, Canada & Australia